PHILBRICKEV / DC FAST CHARGING

02 — POWER THAT MOVES WITH DEMAND

More power.
Less waiting.

Fast-charging solutions engineered for the places, fleets and networks moving electric mobility forward.

Plan your DC project Explore the range
DC FAST CHARGERS30 — 720 kWBUILT TO SCALE

Charging at the speed of ambition

Big power.
Clear direction.

As EV adoption accelerates, charging infrastructure needs to grow with it. PhilbrickEV DC chargers are designed to serve the high-utilization sites shaping tomorrow’s mobility.

From focused installations to ambitious charging hubs, choose a power class that fits your operation and your next step.

Plan your charging network
DESIGNED TO GROW WITH YOUR SITE30 — 720 kW
30 kW / START120 kW / SCALE240 kW / EXPAND720 kW / ACCELERATE

Find your charger price

Choose your setup.
See the price.

Select a DC power rating to view its price.

PhilbrickEV DC fast charger with dual CCS2 charging cables PHILBRICKEV / DC FAST CHARGER
01
Choose DC charger power
Your selected charger priceLoading price…60 kW
Enquire about this model
CCS2 connector 01DC fast-charging connector
CCS2 connector 02DC fast-charging connector
Broad CCS2 vehicle compatibilityCompatible with all makes and models equipped with a CCS2 DC inlet and supporting DIN SPEC 70121 or ISO 15118. Charging speed depends on each vehicle’s acceptance rate.

When both guns are used, available output is shared according to the selected charger configuration. Vehicle acceptance and charging speed vary by model.

Estimate your charging business

See what your
charger could earn.

Estimate monthly charging sales and energy costs using your selected charger power and operating assumptions. This is a separate estimate, not the product price.

Choose DC charger power for your estimate

Adjust the operating assumptions

YOUR INDICATIVE MONTHLY ESTIMATE

Estimated energy delivered—
Charging sales—
Estimated electricity cost—
Contribution after energy cost—

Illustrative estimate only: modelled as rated charger power × 24 hours × utilization × operating days. Contribution subtracts only the electricity cost entered above; it excludes installation, equipment financing, rent, demand charges, taxes, maintenance, payment/software fees, commission, downtime and other operating costs. Actual energy throughput, vehicle acceptance and tariffs vary by site. Ratings for 360–720 kW depend on a separately validated system configuration. No earnings are guaranteed.

Electric car at a charging station at sunsetBUILT FOR HIGH-UTILIZATION CHARGING.

DC charger highlights

Built to
move more.

High-power DC charging with standards-based vehicle communication and connected site management.

  • Dual CCS2 charging connectors (configuration dependent)
  • 200–1000 V DC output range on documented configurations
  • OCPP 1.6J connectivity, ready for OCPP 2.0.1
Discover connected technology

Engineering reference / PEV-DCXX-D

Power, with
precision.

Electrical, interface and environmental data published for the PEV-DCXX-D datasheet configuration.

DC output

Documented power ratings
30 / 60 / 120 / 180 / 240 kW
Output voltage
200–1000 V DC
Maximum output current
250 A
Charging type
CCS2 DC fast charging
Vehicle protocol
DIN SPEC 70121 / ISO 15118
Vehicles served
Up to 2 (configuration dependent)
Cable length
5 m

AC input & efficiency

Grid supply
3 / N / PE, 380 / 400 V AC (±10%)
Grid frequency
50 / 60 Hz
Rated / maximum input current
46 A / 52 A
Power factor
≥ 0.99
Total harmonic distortion
< 5% at full output power
Maximum efficiency
97.5%

Communications & access

Charger-to-CSMS protocol
OCPP 1.6J; ready for OCPP 2.0.1
Interfaces
4G, Ethernet and WLAN
User interface
10.1-inch colour touchscreen
Authentication
RFID, Plug & Play / Auto-charge; payment terminal optional
Metering
MID metering (CE compliant)
Firmware updates
OTA via HTTP, FTP or OCPP

Protection & environment

Integrated protection
Over/under-voltage, over-current, short circuit, over-temperature and surge
Emergency stop
Integrated
Enclosure / impact
IP55 / IK10
Ambient temperature
−35°C to 80°C
Humidity
5–95%, non-condensing
Cooling / noise
Smart forced-air cooling / ≤50 dB(A) typical
Altitude
Up to 2,000 m

Mechanical & compliance

Dimensions (W × H × D)
750 × 650 × 250 mm
Weight
62 kg
Installation
Wall mount standard; stand column or trolley optional
Certification
CE, ARAI
Warranty
2 years standard

PhilbrickEV’s DC charger portfolio spans 30–720 kW. The supplied PEV-DCXX-D datasheet specifies configurations up to 240 kW; higher-power systems require their own validated configuration and ratings. DC Charger Datasheet

READY TO MOVE FASTER?

Build your next
charging hub.

Talk to our team